李燕乐
发布时间:2015-12-17 13:34:55    作者:    点击:[]
姓名 李燕乐
性别

                                         


出生年月 1989.05
行政职务 支部书记,副主任,副所长
学历 研究生 学位 博士
专业技术职务及任导师情况  副研究员,硕士研究生导师
所在一级学科名称  机械工程
所在二级学科名称  车辆工程、机械制造

 

学术身份

澳大利亚工程师协会认定机械工程师(ANZSCO code 233512)
山东大学青年未来学者、山东大学特色学科杰出青年师资

 

学术兼职

内燃机再制造专业委员会副秘书长、国家自然科学基金委同行评议专家、教育部学位中心通讯评议专家、徐州市科技计划项目评审专家

Int J Mach Tool & Manu, Materials & Design, Int J Mech. Sci., Int J of Adv. Manuf. Tech., J of Manuf. Sci.& Eng., J of Mech. Sci.&Tech., Indian J of Eng.& Mater. Sci., Int J of Manuf. Research, Acta Mech. Sin., Archives of Metallurgy & Materials, Advances in Mechanical Engineering等十余个国际期刊审稿人

Int J Mater. Sci.& App.客座编辑

 

国内外学习和工作经历

学习经历:

2006.09–2010.06 中南大学微电子制造工程专业读本科,获学士学位

2010.09–2011.07 中南大学机械工程专业读硕士研究生

2011.08–2015.04 昆士兰大学机械与采矿学院读博士,获博士学位

工作经历:

2015.03–2015.08 昆士兰大学机械与采矿学院 助理研究员

2015.10–        山东大学机械工程学院 副研究员/硕士生导师

2016.08–2018.08 徐州市丰县科技局副局长(挂职)

2019.03 -        山东大学工程训练中心 副主任(挂职)

 

主讲课程

本科生教学:《电动汽车》、《车辆人机工程学》、指导毕业设计和毕业实习等
(所指导学生获2016山东大学优秀毕业论文、赴德国留学、赴北理工读研、录用到一汽大众等)
研究生教学:《汽车及其动力发展前沿》、《汽车电子技术》、《Man-Machine Engineering》

 

研究领域
研究兴趣:车身先进成形技术、汽车零部件再制造/增材制造、燃料电池制备与模拟
(欢迎有志青年报考硕士研究生!所指导研究生同时获一等学业奖学金、潍柴动力奖学金)


承担科研项目情况

1.国家自然科学基金面上项目,钛板植入物宏微复合超声辅助渐进成形新工艺及其机理研究,2019.08-2022.12,主持;

2.国家自然科学基金面上项目,面向冲蚀磨损的叶片切向渐变涂层设计及再制造修复,2019.08-2022.12,参与;

3.国家自然科学基金青年项目(51605258),铝合金薄板超声辅助渐进成形工艺及其形性协同控制机理研究,2017.01-2019.12,主持;

4.国家自然科学基金青年项目(51605262),激光增材-铣削减材应力耦合机制及其对再制造压缩机叶片服役寿命影响,2017.01-2019.12,参与;

5.山东省重点研发计划(公益性科技攻关),面向气体增压设备再制造的切向渐变涂层设计及工艺装备研发,2019.07-2021.06,主持;

6.济南重工股份有限公司,盾构机主驱动关键部件故障诊断及再制造修复技术开发,2019.08-2021.01,技术负责;

7.潍柴动力(潍坊)再制造有限公司,发动机连杆高速激光熔覆再制造关键技术研发,2019.08-2021.12,技术负责;

8.中国博士后科学基金第59批面上资助(2016M592180),2016.06-2017.12,主持,结题;

9.山东省博士后创新项目专项资金一等资助(201701011),2018.01-2019.12,主持;

10.第四批山东大学青年学者未来计划,2018.07-2023.06,主持;

11.中央高校基本科研业务费(2016TB006),2016.01-2018.12,主持,结题;

12.高性能复杂制造国家重点实验室开放课题(Kfkt2017-04),2018.01-2019.12,主持;

13.企事业单位委托:电动车产业发展及应用技术咨询,2017.06-2018.05,共同负责;

14.企业产学研合作项目,2018.01-2019.01,主持;

15.山东大学2017机械工程一流学科杰出青年师资培育计划,2017.11-2019.11,主持;

16.山东大学2016特色学科青年杰出师资重点培育计划,2016.11-2018.11,主持,结题;

17.高效洁净机械制造教育部重点实验室开放课题,2016.06-2018.05,主持,结题;

18.山东大学机械工程学院新进青年教师项目,2015.10-2016.10,主持,结题;

19.Predictive Modelling of the Incremental Sheet Forming Process (2011–2014),澳大利亚研究理事会与波音公司澳大利亚研究中心共同资助,参与,结题;

20.Development of Advanced Strain and Forming Force Predictive Algorithm for ISF (2014–2015),波音公司澳大利亚研究中心资助,参与,结题。

 

近期主要的代表性论文、著作、专利

在“incremental sheet forming”领域近5年发表SCI论文数全球第8位!(检索自Scopus数据库2019年7月),部分论文列表:

1.Han, K., Li, X.Q., Li, Y.L*, et al. (2019). Experimental and numerical study on the deformation mechanism of straight flanging by incremental sheet forming. International Journal of Mechanical Sciences.160:75-89.

2.Li, Y.L., Cheng, Z.N., Chen, X.X., et al. (2019). Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process. International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-019-04031-3.

3.Liu, Z., Li, Y.L*, et al. (2019). Small data-driven modeling of forming force in single point incremental forming using neural networks. Engineering with Computers. DOI: 10.1007/s00366-019-00781-6.

4.Du, J.Y., Li, F.Y., Li, Y.L*, et al. (2019). Influences of plasma arc remelting on microstructure and service performance of Cr 3 C 2 -NiCr/NiCrAl composite coating. Surface and Coatings Technology. 369:16-30.

5.Lu, H.Y., Li, Y.L*, Li, F.Y.et al. (2019). Damage mechanism and evaluation model of compressor impeller remanufacturing blanks: A review. Frontiers of Mechanical Engineering. 10.1007/s11465-019-0548-8

6.Li, Y.L, Liu, F.Y, Xu, C.X., et al. (2019). Investigation of the effect of process parameters on energy consumption in incremental sheet forming. Procedia CIRP. 80:50-55.

7.Li, Y.L., Chen, X.X., Zhai, W.D., et al. (2018). Effects of process parameters on thickness thinning and mechanical properties of the formed parts in incremental sheet forming. International Journal of Advanced Manufacturing Technology. 98(9-12):3071-3080.

8.李燕乐,陈晓晓,翟维东等.(2018).基于响应曲面法的板料渐进成形最大减薄率预测与分析.吉林大学学报(工学版).DOI:10.13229/j.cnki.jdxbgxb20180056.EI

9.Long, Y.Y., Li, Y.L*,Twiefel, J.,et al. (2018). Effects of Process Parameters on Force Reduction and Temperature Variation during Ultrasonic Assisted Incremental Sheet Forming Process. International Journal of Advanced Manufacturing Technology. 97:13-24.

10.Li, Y.L., Chen, X.X., Li, J.F., et al. (2017). Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process. Procedia Engineering. 207:777-782.

11.Li, Y.L., Chen, X.X., Liu Z.B, et al. (2017). A Review on the Recent Development of Incremental Sheet Forming Process. The International Journal of Advanced Manufacturing Technology. 92(5-8):2439-2462.

12.Li, Y.L., Daniel, W. J. T. and Meehan, P. A. (2017). Deformation analysis in single-point incremental forming through finite element simulation. The International Journal of Advanced Manufacturing Technology 88 (1):255-267.

13.李燕乐,陈晓晓,李方义,孙杰,李剑峰,赵国群(2017).金属板材数控渐进成形工艺的研究进展.精密成形工程 9(1):1-9.(特邀综述)

14.Li, Y.L., Sun, J., and Li, J.F. (2016). A brief review of forming forces in incremental sheet forming. Materials Science Forum. 861:195-200.

15.Li, Y.L., Liu, Z.B., Lu, H.B., Daniel, W. J. T. and Meehan, P. A. (2015). Deformation mechanics and efficient force prediction in incremental sheet forming process. Journal of Materials Processing Technology 221:100-111.

16.Li, Y.L., Lu, H.B., Daniel, W. J. T. and Meehan, P. A. (2015) Investigation and optimization of energy consumption and geometric accuracy in the incremental sheet forming process using response surface methodology. The International Journal of Advanced Manufacturing Technology 79, 2041-2055.

17.Li, Y.L., Liu, Z.B., Lu, H.B., Daniel, W. J. T., Liu, S. and Meehan, P. A. (2014). Efficient force prediction for incremental sheet forming and experimental validation. The International Journal of Advanced Manufacturing Technology 73 (1-4):571-587.

18.Li, Y.L., Liu, Z.B., Daniel, W. J. T. and Meehan, P. A. (2014). Simulation and experimental observations of effect of different contact interfaces on the incremental sheet forming process. Materials and Manufacturing Processes 29, 121-128.

国际会议报告:

1.Li, Y.L. Investigation of the effect of process parameters on energy consumption in incremental sheet forming. LCE 2019; Purdue University West Lafayette; United States. 7th to 122nd May 2019. (Oral Presentation)

2.Li, Y.L. Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process. ICTP2017. Cambridge, UK. 17th to 22nd September 2017. (Oral Presentation)

3.Li, Y.L. A Brief Review of Forming Forces in Incremental Sheet Forming. 12th Asia-Pacific Conference on Materials Processing. Qingdao, China. 9th to 12th June 2016.(Oral Presentation)

4.Li, Y.L. Simulation and Experimental Observations of Effect of Different Contact Interfaces on the Incremental Sheet Forming Process. The 15th International conference on Advances in Materials & Processing Technologies. Wollongong, NSW, Australia. 23rd to 26th September 2012. (Oral Presentation)

5.Li, Y.L. Experimental Study and Efficient Prediction on Forming Forces in Incremental Sheet Forming. The 16th International conference on Advances in Materials & Processing Technologies. Taipei, Taiwan. 22rd to 26th September 2013. (Oral Presentation)

6.Li, Y.L. Investigation on the Effect of Different Contact Interfaces on ISF Process. 2013 Engineering Postgraduate Conference, The University of Queensland. Brisbane, Australia. 3rd June, 2013. (Oral Presentation)

7.Li, Y.L. Deformation Analysis in Single Point Incremental Forming through Finite Element Simulation. 11th Asia-Pacific Conference on Materials Processing. Auckland, New Zealand. 6th to 11th July 2014.(Oral Presentation)


申请发明专利20余项,部分列表:

1.基于实时反馈的旋转超声复合渐进成形装置及方法,ZL201710113277.9

2.基于渐进成形与增材制造的复杂薄壁件成形系统及方法,ZL2016110047408

3.一种多级同步混粉器及热喷涂装置, ZL201811301762.X

4.一种发动机曲轴圆角激光熔覆修复装置及方法,ZL201710571249.1

5.一种激光辅助渐进成形一体化通用装夹装置及成型方法,ZL201710749782.2

6.基于可调柔性多支撑的液压辅助渐进成形装置及方法,ZL201711297209.9

7.能实现感应加热修补的辅助渐进成形装置及方法,ZL201810374431.2

8.基于并联机器人的移动式渐进成形修复装置及方法,ZL201810985049.5

9.一种板材热喷涂用装夹装置及工作方法,ZL201811457137.4

10.用于渐进成形的负压吸附式滚动成形工具、装置及方法,ZL201910081297.1

11.一种用于渐进成形的滚动成形工具、装置及方法, ZL201910080686.26.


获奖项目

1.第四批山东大学青年学者未来计划资助,2018

2.山东大学青年教师教学比赛三等奖,2018

3.山东大学第七批博士后国际交流计划学术交流项目资助,2017

4.中德科学中心(Sino-German Center)项目准备访问资助,2017

5.山东大学2017机械工程一流学科杰出青年师资培育计划,2017

6.山东大学2016机械工程特色学科青年杰出师资重点培育计划,2016

7.昆士兰大学学术旅行奖,2014;

8.国家建设高水平大学公派留学奖学金,2011-2015;

9.澳大利亚昆士兰大学学费奖学金,2011-2015;

10.湖南省优秀毕业生,2010;

11.中南地区港澳特区第4届大学生机械设计制造大赛一等奖,2009

12.湖南省第四届机械创新制造设计大赛一等奖,2009;

 

联系方式

地址:山东省济南市经十路17923号山东大学千佛山校区机械工程学院
邮编:250061
电话:0531-88392208
邮箱:yanle.li@sdu.edu.cn
Linkedin:https://www.linkedin.com/in/yanle1
Researchgate:https://www.researchgate.net/profile/Yanle_Li2

 

上一条:朱振杰

关闭

Copyright ©2017-2020 山东大学机械工程学院 All rights reserved.
办公地址:山东省济南市经十路17923号山东大学千佛山校区 邮编:250061 电话:0531-88392608 传真:0531-88392608 [网站管理]